色欲av无码一区二区三区,中文乱幕日产无线码一区 ,中国男生操美丽御姐鸡巴,精品久久久久久国产

Welcome to Changshu Longyu Chemical Equipment Co., Ltd.

More than 20 years of focus on R&D and production of chemical equipment

Provide I, II carbon steel and stainless steel pressure vessel solutions

Service Hotline:

0512-52093708

+ Wechat number:18626143580

Your location: Home > news > Industry News

How to extract oil from deodorizer

Source:m.barimco.com      Release date: 2025-03-18
Information summary:Deodorization tower is one of the key equipment in the oil refining process, which is mainly used to remove odor substances, free fatty acids and other impurities in the oil, so as to improve the quality and stability of the oil. The following is the general process of refining oil in the deodorizer:
Deodorization tower is one of the key equipment in the oil refining process, which is mainly used to remove odor substances, free fatty acids and other impurities in the oil, so as to improve the quality and stability of the oil. The following is the general process of refining oil in the deodorizer:
1. preheating: heat the oil after degumming, deacidification and other pretreatment to a certain temperature, usually around 100 ℃ -120 ℃, to reduce the viscosity of the oil and facilitate subsequent treatment.
2. steam introduction: high temperature and high pressure steam is introduced into the deodorization tower to fully contact with grease. The function of steam is to bring out the odor substances, free fatty acids and other impurities in the oil, and also to stir the oil, so that the oil and steam can be fully mixed.
3. stripping: while introducing steam, depressurize the deodorizer to reduce the pressure in the tower to a certain extent, usually about 0.1-0.5 kPa. Under the condition of reduced pressure, the boiling points of odor substances and free fatty acids and other impurities in the oil are reduced, and the oil is easier to be extracted by steam.
4. separation: the mixture of oil and water vapor after stripping enters the separator, and the oil and water vapor are separated by gravity separation or centrifugal separation. The separated steam is discharged after cooling and condensation, and the grease enters the next process.
5. cooling: cool the separated grease to room temperature or slightly higher for storage and transportation. The oil after cooling is the refined oil after deodorization treatment.
      In the actual oil refining process, the operating conditions and process parameters of the deodorizer will be adjusted and optimized according to the type of oil, quality requirements, production scale and other factors. At the same time, in order to improve the deodorization effect and oil quality, some auxiliary agents, such as citric acid and antioxidant, may also be added to the deodorizer.
建始县| 湟源县| 平顺县| 清涧县| 麦盖提县| 汤原县| 平遥县| 雅江县| 宁国市| 关岭| 凤冈县| 舞阳县| 满洲里市| 洪湖市| 新民市| 广东省| 毕节市| 兴和县| 全州县| 刚察县| 门头沟区| 屯门区| 西宁市| 安化县| 红安县| 郓城县| 龙游县| 莱阳市| 开平市| 德清县| 阿荣旗| 皋兰县| 札达县| 诸暨市| 沙河市| 赣州市| 广宗县| 肥东县| 牟定县| 天水市| 太白县|